This is a newly designed sliding gate opener, which is suitable for light gate. There are two capacity can be chosed: 300kgs and 500kgs.
Our Indian customer purchased this model last week, and today they'll be sent to Shanghai Port.
Following are the instruction of this model
Sliding Gate Opener
Art.No. 1043.114
This sliding gate motor has the very stylish appearance and strongest cast aluminum base; The motor's magnetic reed switch was replaced by one small HALL limit switch plug in the control panel, and which can work more than 10 years lifetime; The soft start and soft stop ensure the 100% safety to motor and gate, and the reverse against obstruction guarantees safety to people; The communication interface between two gate openers synchronize the double gates; Also, it has a variety of interface options for such as UPS, Bluetooth and flashing lights, video intercom system.
Features:
* Thermal protection sensor protects the motor overheat after intensive use
* Gear motor non reversing, no need to install electric lock
* Manual open by release key on power failure
* Anti-crushing protection ensured by electronic device
* Soft start and soft stop, quiet and smooth performance
* Multiple interfaces (UPS, infrared, Bluetooth, flash light, mobile phone visual system, video intercom system, pushbuttons etc.)
Technical parameters:
Specifications | 1043.114A | 1043.114B |
Output torque（N. m） | 7 | 20 |
Max weight（KG） | 300 | 500 |
Power supply | AC220V 50Hz (AC110V 60Hz) | |
Limit switch | Spring/Magnetic (NC/NO) | |
Revolution | 1400 | |
Gate moving speed(m/min) | 10 | |
Noise(dB) | ≤56 | |
Temperature(℃) | -40～+65 | |
Protection class | IP44 | |
Application: operator Sliding-300 for residential and industrial sliding gates weighing up to 300 kg; operator Sliding-800 — for gates weighing up to 800 kg.
Advantages: high protection class (IP54) excludes the ingress of moisture and dust into the control unit; the control board has an integrated receiver for remote control (recording of up to 60 remote controls).
Installation: the operator is securely attached to the mounting base in four points, conveniently located on both sides of the operator, which makes the installation easy.
Design: the upper part of the body is made of impact-resistant ABS-plastic, and the bottom part is made of high-quality aluminum alloy, which powder-painted.
