Common faults and solutions of automatic doors

Jan 23, 2023 Leave a message

During the use of the door body, some minor faults will inevitably occur. The following is the treatment method for common faults

The door cannot be opened even manually. or close the door

[Cause] There is an obstacle in the door guide. Or get stuck with an obstacle.

[Countermeasures] Please turn off the power and remove obstacles.

[Reason] The door has been locked.

[Countermeasures] Please turn off the power and unlock it.

[Reason] If the above-mentioned situation occurs, it is generally considered to be a malfunction of the manipulator.

[Countermeasures] Please turn off the power and contact us.

The door can be opened (closed) manually but cannot be opened (closed) automatically

[Cause] The power switch is not turned on.

[Countermeasures] Please connect the power switch.

[Cause] The start sensor cannot be detected.

[Countermeasures] Please turn off the power and contact us.

[Cause] If the situation other than the above occurs, it is generally considered to be a failure of the door operator.

[Countermeasures] Please turn off the power and contact us.

The opened door cannot be closed.

[Cause] There is an obstacle in the guide rail. Or get stuck with an obstacle.

[Countermeasures] Please turn off the power and remove obstacles.

[Cause] The starting sensor or auxiliary sensor keeps running.

[Countermeasures] Please remove the object that the sensor is detecting.

[Cause] If the situation other than the above occurs, it is generally considered to be a failure of the door operator.

[Countermeasures] Please turn off the power and contact the nearest service center.

Noise or smell from door operator.

[Cause] It is generally considered to be a failure of the door operator.

[Countermeasures] Please turn off the power and contact the nearest service center.