Automatic induction glass door installation method
1. Measure the size of the door opening at the construction site: length * height, measure three points separately, and the smaller size shall prevail
The calculation of the size of the automatic door body: the height of the movable door body = the height of the bottom of the aluminum alloy track -30~45mm (the automatic door unit equipment will be different due to different brands, and the parameters of the automatic door unit should be clearly understood before the calculation, please contact Professional automatic door company helps to calculate). Mobile door width: According to the opening method of single opening, double opening, fixed glass and frame, etc., it is necessary to settle separately. Generally, the overlap of pure tempered glass door is 35-50mm. It is reasonable to have door frame automatic door.
2. After the materials and accessories required for the installation of the automatic door are prepared, the technicians of the automatic door company enter the site for construction. First install the automatic door aluminum alloy track. The automatic door aluminum alloy track should be fixedly installed on the load-bearing steel structure (the steel structure is generally welded by 12# or 14# channel steel and 4# angle steel). The material of the load-bearing steel structure should be based on The size of the door opening and the weight of the force are used to select the profile and structural design. When installing the guide rail, it must be vertical, horizontal, firm, and flat to ensure that the rail can be installed in a horizontal and vertical state. During the installation process, a professional horizontal measuring instrument should be used to assist the installation.
