Features:
The 90 angle swing door operator is a heavy duty swing door operator that can push and pull heavy duty swing door operators weighing up to 500kg with a single door, with a single door width of 0.7m (W). The unit is easy to install and maintain.
The design of the unit is beautiful and generous, and the bearing capacity is large; the end spline teeth and the square tenon are perfectly matched, so that the door body runs quietly and smoothly.
When an obstacle is encountered during operation, the door will stop or open in the opposite direction.
The 90 angle swing door operator unit can be equipped with sensors, wireless keys, password card readers, tact switches, infrared hand sensors and other door opening methods.
Depending on the application, pull-arm and push-arm installations are available.
It can be used with electronic locks and provides excellent security even with strong winds outdoors.
|
*2 million times of service life ensure stable and long-time use. *Superior safety protection function, reverse against obstruction on door closing.Economic brushless motor, and easy gears, cost-effective *Running parameters can be easily adjusted by the built-in control panel *Innovative design of mechanical part, easy and efficient to install. articulated arm, sliding arm & track both available, can be mounted on hinge side and opposite hinge side *One model suit both left and right hand doors, provides interfaces of sensors, building intercom system, access control system, safety beams, electric locks, fire alarms, power output, wall switch, and remote controls *Support double door master and slave synchronization and two doors interlock function. *Emergency power supply can be configured when necessary to meet security requirements. *Suitable for non-wind resisted interior residential doors, meeting room door, washroom and so on |
 |
Technical parameters:
|
Specifications |
Light-Swing 1093.1830 |
||
|
Door width(max)inch(mm) |
39.4"(1200) |
Opening speed |
250~450mm / sec |
|
Door weight(max)lbs. (kg) |
220(100) |
Closing speed |
250~450mm / sec |
|
Product dimensions inch(mm) |
20.3"×3.7"×3.5(515×95×90) |
Opening/closing time(sec.) |
3~7 |
|
Product weight(kg) |
6.5 |
Hold-open time(sec.) |
1~30 |
|
Output torque(N.m) |
65 |
Ambient temperature(℃) |
-20~+55 |
|
Motor power(W) |
50 |
Protection class |
IP41 |
|
Power standby(W) |
<2 |
Co5mpression force on the door |
By switch |
|
Power Required(VAC,Hz) |
110/220,50/60 |
Left/right hand setting |
By switch |
|
Rated current(A) |
<1 |
Push &Go function |
★ |
|
Power Output(max)(VDC mA) |
12,500 |
Protection against obstruction |
★ |
|
Shaft opening angle(°) |
45~135 |
||
Hot Tags: 90 angle swing door operator, China, manufacturers, suppliers, factory, wholesale, high quality, made in China
