The maintenance cycle of the automatic swing door machine is essential to ensure its normal operation and extend its service life. Based on search results and industry standards, the following are the maintenance cycle recommendations for automatic swing door machines:
1. Daily inspection
Frequency: Daily
Content:
- Check whether the automatic door is operating normally, including the speed and force of opening and closing.
- Clean the debris around the door machine and ensure that there is no dust or obstacles on the sensor and door frame.
- Check whether the safety signs are intact to ensure that pedestrians can pass safely.
2. Regular maintenance
Frequency: Every 6 months
Content:
- Have a professional conduct a comprehensive inspection of the automatic swing door machine, including motors, sensors, tracks and other components.
- Clean and lubricate moving parts to ensure smooth operation of the door machine.
- Check the electrical circuits and connectors to ensure that there is no looseness or damage.
- Test the various functions of the automatic door, such as opening speed, closing force, etc., to ensure that they meet safety standards.
3. In-depth maintenance
Frequency: Every year
Content:
- Disassemble and clean key components of the automatic swing door machine, such as motors, gears, etc.
- Replace severely worn components, such as bearings, seals, etc.
- Check and calibrate sensors to ensure their accuracy and sensitivity.
- Update software and firmware to ensure that the control system of the automatic swing door machine is up to date.
4. Maintenance under special circumstances
Frequency: Depends on the situation
Content:
- Increase the frequency of inspections under extreme weather conditions (such as heavy snow, heavy rain, high temperature, etc.) to ensure the normal operation of the automatic swing door machine.
- When the automatic swing door machine has abnormal conditions (such as increased noise, slower opening or closing speed, etc.), immediately perform inspections and maintenance.
5. Recording and tracking
Frequency: After each maintenance
Content:
- Record the time, content and problems found for each maintenance.
- Track maintenance records, analyze the operating status and potential problems of the automatic swing door machine, and formulate corresponding preventive measures.
By following the above maintenance cycle recommendations, you can effectively extend the service life of the automatic swing door machine and ensure its safe and reliable operation. At the same time, regular maintenance also helps to promptly detect and solve potential problems and avoid safety accidents caused by equipment failure.
