Product application:
As an sensor, it is suitable for various automatic doors. It has high sensitivity, fast and accurate response, excellent avoid distracting by microwave penetration. It is fully applied in commercial, industrial,and other areas with high requirements for automatic control technology.
Automatic Door Motion Sensor Overall characteristics:
*Using Intelligently detection control line,greatly increase the sensitivity and stability of sensing detection.
*X-Y axis flexible antenna adjustment mode ,ensures accurate area sensing adjustment.
*The microwave sensor module imported from Germany of 24.125 GHz will be not affected by environmental factors such as temperature and humidity, and it has good and reliable work performance.
Automatic Door Motion Sensor Technical parameter:
Technology | Microwave and Microwave Processors |
Transmission frequency | 24.125GHz |
Transmit power | <20dbm E1RP |
Transmission frequency density | <5mw/cm2 |
Maximum installation height | 4000mm 5000mm can be customized |
Installation inclination | 0° to 90°(longitudinal) -30° to +30° (horizontal) |
Voltage | 12V-30VAC+/-10% |
Physical dimension | 121(L)*80(W)*51(H)mm |
Dynamic current | 40mA |
Quiescent Current | 10mA |
Installation:
1. Install the sensor (the height does not exceed 4 meters);
2. Connect the cable to the corresponding terminal of the automatic door;
Yellow (1, 2): ● Signal output (COM, NO: switching, regardless of polarity, allowing a large current of 50mA)
Red (3, 4): ● Power input (12V-24V DC or AC: no polarity)
3. Remove the cover and secure the base of the sensor with screws;
4. Connect the wiring terminals of the cable to the sensor;
5. Connect the sensor to the power supply, and the indicator light of the sensor flashes 5 times;
6.●Adjust the sensing angle of the microwave sensor (factory setting defaults to 40° to 50°)
● Adjust the sensitivity potentiometer according to the actual sensing (factory is between 3 and 5).
7. Cover the cover and verify the test.
Note: When setting the sensing sensitivity, too high sensitivity may affect its stability and anti-interference ability.
Hot Tags: Automatic Door Motion Sensor, China, manufacturers, suppliers, factory, wholesale, high quality, made in China
