Hangzhou Safedoor Automation & Hardware Co Ltd

Telephone:

+86-571-88177797

Auto Door Feet Sensor Switch
Auto Door Feet Sensor Switch

Auto Door Feet Sensor Switch

Product application: It is widely used in induction control of the entrance and exit automatic doors in the operating room, laboratory and clean rooms of hospitals. It is easy to operate, uses feet to sense, releases your hands, and effectively avoid the pollution of hand contact. Overall...

Send Inquiry

  • Product Details

Product application:

It is widely used in induction control of the entrance and exit automatic doors in the operating room, laboratory and clean rooms of hospitals. It is easy to operate, uses feet to sense, releases your hands, and effectively avoid the pollution of hand contact.


Overall characteristics:

► It is integrated with the controller and pedal box ,so the installation and wiring are simpler.

 It is controled by microcomputer, international refined brushed stainless steel surface design.

 Its screws are fixed on the front snugly,and inlaying the correlation electric eye.It is easy to install,meanwhile it has stable performance and strong anti-interference ability.

 Microprocessor modulating and demodulating active by infrared.

 Detection mode: When the foot appears,the beam will be cut off, then triggering signal produced.


Technicai parameter:

Technical Measures

Microprocessor modem active active infrared

Detection mode

The foot appears and the beam is cut off, triggering a signal to open the door.

Power input

AC/DC 12-30V

Signal indication

When the shooting control is effective the red light is on and the green light flashes when the beam is cut off.

Anti-interference characteristic

Sunshine 81000LUX

Electronic microwave

Meet 89,/336CEE standard

Signal output

relay normally open or normally closed optional

Recommended installation height

Center is 0.3 meters from the ground

Reaction time

relay output45ms

Monitor signal

4.5S MA

Ambient temperature

-20℃ +55℃

White light

36000LUX

Physical dimension

186mm*175mm*53mm

Stand-by current

8.2mA (DC 12V)

Working current

47mA (DC 12V)


Hot Tags: auto door feet sensor switch, China, factory, high quality, made in China
Related Products
  • Feedback