Hangzhou Safedoor Automation & Hardware Co Ltd

Telephone:

+86-571-88177797

Magnetic Lock For Auto Door
Magnetic Lock For Auto Door

Magnetic Lock For Auto Door

Magnetic Lock Wiring Instructions A.12VDC Input: Required power 0.5Amp(Minimum) Connect the position(+)lead from a 12VDC power source to V+ Connect the ground(-)lead from a 12VDC power source to V- Check jumper for 12VDC operation. B.24VDC Input: Require power 0.25 Amp(minimum). Connect the...

Send Inquiry

  • Product Details

Magnetic Lock Wiring Instructions

A.12VDC Input:

Required power 0.5Amp(Minimum)

Connect the position(+)lead from a 12VDC power source to V+

Connect the ground(-)lead from a 12VDC power source to V-

Check jumper for 12VDC operation.

B.24VDC Input:

Require power 0.25 Amp(minimum).

Connect the position(+)lead from a 24VDC power source to V+

Connect the ground(-)lead from a 24VDC power source to V-

Check jumper for 24VDC operation.

C.Contacts:

Relay dry contacts are rated 1Amp at 24VDC for safe operation,do not exceed this rating.

If you require a normally open switch,connect the wires from the system to COM and NO.

If you require a normally closed switch, connect the wires from the system to COM and NO.

Important!

If power switch is not wired between DC source voltage and magnet,it will take a longger time to de-energize the magnet simulating residual magnetism.

 


Hot Tags: magnetic lock for auto door, China, factory, high quality, made in China
Related Products
  • Feedback